ECR ONE - Two Speed

Product Options

Voltage:
Output Power:
Direction-of-Rotation:
Plug:

Quantity:

Price: $72.99

Benefits:

save 72% the energy used by shaded pole motors
up to 65% efficient
standard size, mounting and accessories for easy "drop in" replacement of shaded pole motors
longer life and low maintenance

2-Speed Benefits:

ECR ONE 2-Speed motors can be used to reduce power consumption and thermal losses in walk-in coolers, by switching the fan to low speed when the evaporator is not in a cooling cycle. Fan power consumption is proportional to fan speed cubed, so during compressor-off periods in a fan running continuously at part speed uses less power than one running intermittently at full speed, and much less power than one running continuously at full speed

Applications:

condenser and evaporator fans in supermarket display cases, beverage merchandisers, refrigerated vending machines(click on the hyperlinks for more information)
any other application where induction motors are installed

Product Specifications: (for more infomation and drawings see the ECR ONE datasheet):

output power: 16W
speed: standard (1550/1000)rpm
voltage: 115V/60Hz
rotation: direction of rotation can be either CCW-SE (standard) or CW-SE as seen when facing the motor from the shaft end (SE)
protection: IP55
design life: 60,000hrs (based on bearings design life)
bearings: ball bearings
approvals: UL, cUL
insulation class: A
compliance: EN60335, EN61000, EN55014

Electronics safety features:

If the motor fails to start, locked rotor/stall detection switches the motor to standby mode, with automatic restart after 60 seconds. This software detection protects the motor with a timed restart algorithm to limit maximum winding temperature.
Self-resetting thermal protection stops the motor if over-temperature occurs. The motor restarts when the winding temperature is back within the operating range.